通达信代码混乱,通达信56个板块代码

　　1：通达信软件打的股票编码不对而是旧编码不是我要的股票

　　那是因为你通达信版本太低了，装最新版就好了

　　2：通达信公式乱码，有时只汉字乱，有时中英文全乱，原因及解决办法

　　你这个是html语言的网页源代码，将代码里面的<>内容全部去掉就行，不过你这公式只画了四条均线，后面的都没用上，应该没全吧

MA1:MA(CLOSE,M1);
MA2:MA(CLOSE,M2);
MA3:MA(CLOSE,M3);
MA4:MA(CLOSE,M4);
VAR3:=LLV(HIGH,240);
VAR4:=100*(CLOSE-VAR3)/VAR3;
VAR5:=(CLOSE-LLV(LOW,528))/(HHV(HIGH,528)-LLV(LOW,528))*100;
VAR6:=(CLOSE-LLV(CLOSE,530))/(HHV(CLOSE,530)-LLV(CLOSE,530))*100;
VAR7:=0;
VAR8:=SMA(MAX(CLOSE-REF(CLOSE,1),0),34,1)/SMA(ABS(CLOSE-REF(CLOSE,1)),7,1)*100;
VAR9:=SMA(MAX(CLOSE-REF(CLOSE,1),0),13,1)/SMA(ABS(CLOSE-REF(CLOSE,1)),13,1)*100;
VAR10:=IF(TROUGHBARS(3,16,1)=0 AND HIGH;

　　3：通达信编辑公式为啥是乱码呢

　　会有这种情况的,将这些乱码去掉在换个新名就解决了,如还不能高定,将所有源码发上来,我为你改.

　　4：通达信自编的主图上为什么出现和代码不相干的字如何解决

　　通达信软件由于一些主图属于系统公式，你修改后关闭再开启就会恢复，不保存修改。只有新建立一个技术指标公式，把你自己编辑的设为主图就可以了。如果一定要叠加在某个系统主图公式，那就把那个主图公式复制过来，和你的放一起就解决了。

　　5：跪求通达信冠军MACD和冠军背离线附图指标源码，那位大神给下！

　　{供参考}
{冠军MACD+顶底背离画线}
DIFF:=EMA(CLOSE,12)-EMA(CLOSE,26);
DEA:=EMA(DIFF,9);
MACD2:=2*(DIFF-DEA);
DU0:=CROSS(DIFF,0);
UD0:=CROSS(0,DIFF);
TDU0:=BARSLAST(DU0);
TUD0:=BARSLAST(UD0);
DU3:=REF(DU0,1);
UD3:=REF(UD0,1);
TDU3:=BARSLAST(DU3);
TUD3:=BARSLAST(UD3);
UDGLINE:=IF(TDU3<TUD3,REF(HHV(HIGH,2),TDU3),REF(LLV(LOW,2),TUD3));
JDU0:=REF(CLOSE,1)<=REF(UDGLINE,1) AND CLOSE>UDGLINE AND TDU0<TUD0;
JUD0:=REF(CLOSE,1)>=REF(UDGLINE,1) AND CLOSE<UDGLINE AND TUD0<TDU0;
JDU1:=JDU0 AND COUNT(JDU0,TDU0)=1;
JUD1:=JUD0 AND COUNT(JUD0,TUD0)=1;
STICKLINE(MACD2>=0,0,MACD2,1,1),COLOR0000FF;
STICKLINE(MACD2>=0 AND MACD2<REF(MACD2,1),0,MACD2,1,0),COLORGREEN;
STICKLINE(MACD2<0,0,MACD2,2,0),COLORFFFF00;
STICKLINE(MACD2<0 AND MACD2>REF(MACD2,1),0,MACD2,1,1),COLORFFFF00;
STICKLINE(CLOSE>0,0,0,1,0),COLOR808080;
DEFUT:=BARSLAST(CROSS(MACD2,0));
DEFDT:=BARSLAST(CROSS(0,MACD2));
DEFUL:=IF(MACD2>=0,HHV(MACD2,DEFUT+1),REF(HHV(MACD2,DEFUT+1),DEFDT+1));
DEFDL:=IF(MACD2<0,LLV(MACD2,DEFDT+1),REF(LLV(MACD2,DEFDT+1),DEFUT+1));
DEFU2L:=REF(DEFUL,DEFUT+1);
DEFD2L:=REF(DEFDL,DEFDT+1);
DRAWICON(LLV(MACD2,4)>0 AND MACD2<REF(MACD2,1) AND REF(MACD2,1)>REF(MACD2,2) AND REF(MACD2,2)>REF(MACD2,3),MACD2+0.38,9);
DRAWICON(HHV(MACD2,4)<0 AND MACD2>REF(MACD2,1) AND REF(MACD2,1)<REF(MACD2,2) AND REF(MACD2,2)<REF(MACD2,3),MACD2-0.13,11);
DRAWICON((JUD1 OR BARSLAST(JDU1)>BARSLAST(JUD1)) AND MACD2>=0 AND REF(MACD2,1)<REF(DEFU2L,1) AND MACD2>DEFU2L,MACD2+0.50,5);
DRAWICON((JDU1 OR BARSLAST(JDU1)<BARSLAST(JUD1)) AND MACD2<0 AND REF(MACD2,1)>REF(DEFD2L,1) AND MACD2<DEFD2L,MACD2-0.14,6);
VAR111:=JDU1 OR BARSLAST(JDU1)<BARSLAST(JUD1);
VAR112:=HHV(MACD2,4)<0 AND MACD2>REF(MACD2,1) AND REF(MACD2,1)<REF(MACD2,2) AND REF(MACD2,2)<REF(MACD2,3);
价因子:=IF(CLOSE/OPEN>1.06,2.5,0),COLORLIBLUE;
STICKLINE(价因子,0,1,1,1),COLORYELLOW;
量变线:=VOL/MA(VOL,5)COLORWHITE,LINETHICK2;
量因子:=IF(VOL/MA(VOL,5)>2,2.5,0);
STICKLINE(量因子,0,1,1,1),COLORYELLOW;
DRAWICON(CLOSE/OPEN>1.06,1,24);
DRAWICON(VOL/MA(VOL,5)>2,0.8,25);
A1:=BARSLAST(REF(CROSS(DIFF,DEA),1));
底背离:=REF(CLOSE,A1+1)>CLOSE AND DIFF>REF(DIFF,A1+1) AND CROSS(DIFF,DEA);
STICKLINE(底背离,0,0.03,6,0),COLOR00FF00;
底背:DRAWLINE(A1=0,DEA,底背离,DEA,0),COLORRED,LINETHICK4;
DRAWTEXT(底背离,0.12, 底背离),COLORFF00FF;
A2:=BARSLAST(REF(CROSS(DEA,DIFF),1));
顶背离:=REF(CLOSE,A2+1)<CLOSE AND REF(DIFF,A2+1)>DIFF AND CROSS(DEA,DIFF);
顶背:DRAWLINE(A2=0,DEA,顶背离,DEA,0),COLORGREEN,LINETHICK4;
DRAWICON(CROSS(DIFF,DEA),DEA,1);
DRAWICON(CROSS(DEA,DIFF),DEA,2);

　　6：求这个MACD指标公式。要求通达信的!!

　　我没太弄懂您的想法，不知道您是不是想要整变色的线条吗直接扣我！